GX-310

SiLane^TMSilane coupling agent GX-310

Part I: Technical specifications of chemicals

1. Chemical name:

Polymethylhydrogen siloxane

2. Molecular formula:

　　

3. Molecular structure:

 

 

 

4 、 CAS NO.:

　　63148-57-2

5. Corresponding brand:

　　KF-99、MH-1107

6. Characteristics:

7. Application:

8. Typical Physical Properties

Parameters	Unit	standard index
Appearance		Colorless transparent oily liquid
Hydrogen content	%	0.1-1.6
Viscosity	mm2/s( 25℃)	5-300
pH		6-7

 

9. Application Information

10. Safety Information

　　This document does not include safety information required for the safe use of this product. Before operation, please read the product and its safety data sheet and the container label to obtain information about the safe use of the product and the hazards to body, environment and health.

11. Validity Period and Storage

Sealed and stored in a cool, dry and ventilated place, moisture-proof and waterproof, away from kindling, heat source and light source. Under the above conditions, the storage period is six months.

12. Packaging

Finished products shall be packed in plastic drums, iron drums or iron-plastic drums, with net weight of 5Kg, 25Kg, 200Kg or 1000Kg per barrel. Special specifications shall be reserved.

13. Limited Warranty Information-PLEASE READ CAREFULLY

The information provided herein shall be deemed to be accurate on the basis of good faith. However, the conditions and methods of using our products are beyond our control. This information is not a substitute for customer testing to ensure that our products are safe, effective and fully satisfactory for a particular end use. This manual only describes the use of the product, and the actual application effect needs to be suitable for various application systems. The advice we provide shall not be considered as a cause of infringement of any patent rights.

Part II: Technical Specifications for Chemical Safety

Prepared in accordance with GB/T 16483 and GB/T 17519

1. Identification number of the substance

　　Product Details

　　Name of commodity: Polymethylhydrogen siloxane

　　English Name：Poly(methylhydrosiloxane)

　　Commodity Number：GX-310

　　Manufacturer: Anhui Sibao Organic Silicon New Material Co., Ltd

　　Enterprise Address: Wujiang Town Fine Chemical Base, He County, Ma'anshan City, Anhui Province

　　Sales Phone：025-58494046

　　Fax：025-58742173

　　Emergency telephone：0555-5963308(8:30-17;00)

　　Website：www.gbxfsilicones.com

　　Version：2.0

　　First Edition Time: May 24, 2021

　　Revision time：/

　　Information on emergency response: Department of Environment, Health and Safety.

　　Product recommend and Restricted Use:Industrial use only.

2. Hazard Overview

Emergency Overview

Appearance and Character	oily liquid
Color	Colorless
Smell	No data

Flammable liquids and vapours. Skin contact can be harmful.

3. Ingredient/composition information

　　Substance/mixture: Substance

　　Chemical name: Polymethylhydrogen siloxane

　　Concentration Range：<100%

　　CAS No.：63148-57-2

4. First-aid measures

　　Inhalation: If inhaled, move to fresh air. If symptoms occur, seek medical advice.

　　Skin contact: Be careful to wash with water and soap. If symptoms occur, seek medical advice.

　　Eye contact: It is prudent to flush eyes with water. If irritation persists, seek medical advice.

　　Ingestion: such as swallowing: do not vomit. If symptoms occur, seek medical advice. Gargle thoroughly with water.

　　Most Important Symptoms and Health Effects: Not reported.

　　Advice for Protecting RescuersFor first responders, no specific precautions are required.

　　Special tips for doctors: symptomatic adjuvant therapy.

5. Fire protection measures

　　Fire extinguishing method and extinguishing agent：Water spray, alcohol-resistant foam, carbon dioxide (CO2) or dry chemical powder.

　　Unsuitable extinguishing agent: Not reported.

　　particularly dangerous: Exposure to combustion products may be hazardous to health.

　　harmful combustion productsCarbon oxide, silicon oxide.

　　special fire extinguishing method：

Appropriate fire extinguishing measures shall be adopted according to the situation and surrounding environment.

Spray water to cool unopened containers.

When safe, remove undamaged containers.

Evacuate the site.

　　Special Protective Equipment for Firefighters：

Wear self-contained breathing apparatus for fire fighting if necessary.

Use personal protective equipment.

6. Emergency measures for leakage

　　Personnel protective measures, protective equipment and emergency treatment procedures:

　　Environmental protection measures:

　　Avoid discharge into the surrounding environment.

If safety can be ensured, measures can be taken to prevent further leakage or spillage.

　　Methods of containment and removal of spilled chemicals and disposal materials used:

Absorbed with inert material.

In the case of large spills, containment or other appropriate leak-proof measures shall be taken to prevent material diffusion.

If the contained material can be pumped out, the recovered material shall be stored in a suitable container.

Remove residual spill material with a suitable absorbent.

Local or national regulations may apply to the release and disposal of such materials, as well as materials and articles used in cleaning up emissions. You need to determine the applicable regulations for yourself.

Parts 13 and 15 of this SDS give information about specific local or national requirements.

7. Operation, Disposal and Storage

　Operation processing

　　Technical measures: See Engineering Controls in Section 8.

　　Local or general ventilation: Use only under adequate ventilation

　　Safety Handling Precautions：

　　Operate in accordance with good industrial hygiene and safety practices.

　　Storage

　　Arrange storage conditions：

Store in properly marked containers.

Store in accordance with specific national regulations.

　　Packaging Materials: Unsuitable materials: Not reported.

8. Exposure control and personal protection

　　Hazard composition and occupational exposure limits:Substances that do not contain occupational exposure limits.

Ensure adequate ventilation, especially in enclosed areas.

Reduce workplace exposure as much as possible.

　　Personal protective equipment:

　　Respiratory system protection: Use respiratory protection unless adequate local exhaust ventilation or exposure assessment demonstrates that the exposure level is within the recommended exposure guidelines.

　　Filter TypeOrganic gases and low-boiling vapor types

　　Eye surface protection: Wear safety glasses

　　Skin and body protection: Wash off after skin contact.

　　Hand protection: Wash hands before rest and at the end of work.

　　Hygiene measures：

Make sure the eyewash and safety shower are located near the workplace.

When using, diet and smoking are strictly prohibited.

Contaminated clothes can be reused after washing.

The above precautions are only for room temperature operation, and additional precautions may be required for heat use or aerosol/spray application.

For further information on the use of silicones/organic oils in consumer product aerosols, please refer to the Silicone Industry Guidelines for the Use of Such Materials in Consumer Product Aerosol Applications (www.SEHSC.com).

9. Physical and chemical characteristics:

Appearance and properties: oily liquid	Vapor pressure: no data available
Color: Colorless	Vapor density: no data
Odor: Aromatic	Density/relative density: 1.006
Odor threshold: no data available	Solubility
PH value: no data	Water solubility: no data
Melting point/freezing point: no data	n-Octanol/water partition coefficient: No data available
Initial boiling point and boiling range: no data available	Self-ignition temperature: no data
Flash point: 204 ℃	Decomposition temperature: no data
Evaporation rate: no data	Kinematic viscosity: no data
Flammability (solid, gas): No data available	Explosion characteristics: no data
Upper explosion limit: no data	Oxidizing: No data available
Lower explosive limit: no data

　　Chemical name: Polymethylhydrogen siloxane

　　Molecular formula：C7H22O2Si3

　　molecular weight：222.5

10, Stability and Reactivity

　　Reactivity: Not classified as a reactive hazard

　　Stability: Stable under recommended storage conditions.

　　Hazardous reactionNormal processing does not occur.

　　Conditions to be avoided: No data.

　　ForbiddenStrong acid, strong alkali, strong oxidant

　　Dangerous decomposition products

thermal decompositionOxides of carbon, oxides of nitrogen, SiO₂

11, Toxicological Information

　　Pathway of exposureInhalation, skin contact, ingestion, eye contact

　　acute toxicity：There is no need to classify based on the information available.

　　Skin corrosion/irritation：There is no need to classify based on the information available.

　　Severe eye damage/eye irritation：There is no need to classify based on the information available.

　　Respiratory or skin allergies：There is no need to classify based on the information available.

　　germ cell mutagenicity：There is no need to classify based on the information available.

　　Carcinogenicity: No classification is required based on existing information.

　　reproductive toxicity: No classification is required based on existing information.

　　Specific Target Organ Systemic Toxicity-One Exposure: No classification is required based on existing information.

　　Specific target organ systemic toxicity-repeated exposure: No classification is required based on existing information.

　　Inhalation hazard: No classification is required based on existing information.

12, Ecological Information

　　Ecotoxicity:No data

13. Disposal

　　Disposal method

　　Residual waste: Handle according to local regulations.

　　Contaminated packaging: Empty containers should be sent to a permitted waste disposal site for recycling or disposal.

14. Transportation Information

　　International regulations

　　Land transportation (UNRTDG)：Not as dangerous goods management

　　Air (IATA-DGR)：Not as dangerous goods management

　　Sea (IMDG-Code)：Not as dangerous goods management

15. Regulatory Information

　　Applicable regulations

　　List information of product ingredients in the following list:

　　the People's Republic of China occupational disease prevention law:

　　Classification Catalogue of Occupational Hazards (2015):Not included

　　dangerous chemicals safety management regulations:

　　Catalogue of Dangerous Goods Chemicals (2015):Not included

　　List of Explosive Hazardous Chemicals (2017):Not included

　　List of hazardous chemicals under key supervision:

　　List of the first batch and the second batch of hazardous chemicals under key supervision:Not included

　　Measures for the Registration of Environmental Management of Hazardous Chemicals (for Trial Implementation):

　　Catalogue of hazardous chemicals for key environmental management:Not included

　　Regulations on the Administration of Narcotic Drugs and Psychotropic Drugs:

　　varieties of narcotic drugs directory:Not included

　　varieties of psychotropic drugs directory:Not included

　　new chemical substances environmental management approach:List of Existing Chemical Substances in China (2013): Included.

16 Other Information

　　Further information

　　References: Internal technical data, data from raw materials SDS\OECD eChem portal search results, as well as the European Chemicals Agency, http://echa.europa.eu/

　　Version：2.0

　　First Edition Time: May 24, 2021

　　Revision time：/

　　Reason for revision: SDS standardized management

To the best of our knowledge and belief, the information provided in this SDS as of the date of publication is accurate. This information is intended only as a guide for safe operation, use, processing, storage, transportation, disposal and distribution and does not represent a warranty or quality statement of any kind. Except as specified in the text, the information provided in this table relates only to the specific materials identified at the top of this SDS, and the information in this table will not be valid when the materials in the SDS are mixed with any other materials or used in any process. The user of the material should review information and recommendations related to the operation, use, processing and storage methods required in the specific environment, including the suitability assessment of the user's final product SDS material (if used)